Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the convenience of gas cooktops but needs an oven for baking? Discover a dual fuel range cooker that gives you the best of both worlds.
Gas cooktops are favored by many home chefs with expertise in the kitchen due to their superior temperature control. They also permit them to use advanced cooking techniques such as grilling. These powerhouse stoves can be expensive, particularly when you need an additional gas hook-up and electrician to install it.
What is a 13amp outlet?
If you own dual fuel range cooker (also known as an electric and gas oven) is required, you'll need a suitably rated 13 amp plug. The plug must also be hard-wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug does not exceed the safe limit which could cause an electrical fire. The current is controlled by a fuse within the plug. The fuse will blow when it is deemed to be overloaded. This protects the appliance against an overload of electricity.
The fuse is rated 13 amps, as indicated on the top of the plug. This is the maximum amount of current the plug could pass without damaging the appliance or heating the socket. It is crucial to ensure that when replacing fuses, you always use the same rated amps as the original. You risk overheating the socket if you replace a fuse using an unrelated rating.
Ceramic 13 amp fuses are extremely durable and can withstand high temperatures that can be generated by the range cooker. Ceramic is also fire-proof, which makes it a more suitable choice than other kinds of fuse.
There are a variety of ways to install a 13 amp plug. The plug can be connected to a live socket with a screw or plastic jaw cord clamp. The plug should be pushed firmly into place and tightened, ensuring that the cord clamp is secure.
Some plugs will include a wiring diagram on cardboard over the pins. These should be removed prior to connecting the wires. The wires should be cut to the correct length, because if they are too long, they could be crushed when the plug covers are replaced. The earth wire should be the longest wire to ensure it is connected before the line and neutral pins.
How do I install the 13amp plug?
The vast majority of dual fuel range cookers in UK are wired with an amp rating of 13 amps. This is crucial because ovens can draw large amounts of current, while normal plug sockets have a 10-amp rating.
In general, new appliances should be fitted with an outlet at the time of sale and this is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug connected and this is the reason for the problem.
When connecting a cooker to an existing plug socket the first thing that needs doing is to ensure that the rating of the fuse in the box matches the plug's rating. This is vital as an incorrectly sized fuse could pose a risk.
It is also recommended that the fuse has been fully seated in the cartridge, and there isn't any movement. The next step is to prepare the flex that will be used. First remove the sheathing from the flex to expose the three conductors insulated within. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors. The nick should be wide enough to allow the sheathing to split and enlarge the nick when it is pulled back revealing the cable beneath. Cut off the excess sheathing, leaving about 40mm beyond the flex.
This flex is placed over the plug and the earth terminal is placed at the top and live and neutral terminals at the bottom. The sheathing around each pin is removed using coloured conductors as a guide. dual fuel range cooker with hot plate is then inserted to the terminal by with the help of the cord grip. If the plug has a clamp for cords that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Finally, connect each conductor that is insulated to the appropriate terminal (starting with the earth first, then neutral and finally the live) by using the channel that they run through in the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw of the 13amp plug is 3kw at 230 volts. This is a lot of power, however the standard fuse that is fitted in the UK plugtop will not fail until the cable has heated to a dangerous level. It is crucial to be aware of the power you are using in your kitchen, since an unfit plug or socket can lead to an explosion.
The fuse inside the plugtops are made of ceramic, around 25mm in length and 240V mains rated. They'll feature the BS kitemark or similar marking on the side and contain sand. Plastic or glass alternatives are available, but they should not be used in conjunction with live plugs.
Most dual fuel range cookers sold in the UK require hard-wired and cannot be plugged directly into an outlet on the wall. They are usually connected to a specific cooker ring circuit, which is only suitable for appliances that use up to 20 amps.
You can check the ring circuit of your home by checking the fuse box, or by speaking to an electrician nearby. You can ask whether the sockets are connected to the same ring, or if they are separate. They should also be able tell you if there is a separate circuit to power your oven.
The size of your kitchen is an important factor when you decide to purchase a dual fuel range cooker. We have a wide choice of cookers to fit any space, from compact 50-60 cm dual fuel models as well as huge 90cm + double oven models from the top brands such as Rangemaster and StovesAreUs.
If you're after something a little more unusual, don't worry - we also have a great selection of electric and gas multi-function cookers. These multifunction cookers can be used to cook a variety of dishes such as curries, pasta, and casseroles!
Currys offers a variety of Cookers. Explore our online selection or visit us in store to see the range. We provide free home installation and delivery on a selection of range cookers as well as flexible payments options. If you have any questions our team is available to assist send us an email or give us a ring. Credit is subjected to status, and terms & condition apply.
What is the maximum current draw of a cooker switch?
There is a lot confusion regarding the maximum current draw of the cooker switch. The fact is, most cookers aren't designed to connect to a standard socket, but instead are hard wired and fed into a dedicated oven ring circuit. This is because they typically consume more than 20 amps when the gas hob and electric oven are used.
You will not find dual fuel range cookers that can be installed in a standard socket as this would pose an extremely high risk of fire and would violate electrical regulations. An experienced electrician will install any new electrical components to an appliance in the kitchen, and they will ensure that the total load (both the oven and the hob) will not exceed the supply capability of the circuit.
Dual fuel range cookers combine the flexibility of a gas stove and the precision and accuracy of an electric oven. They are adored by chefs as well as home cooks. If you want to try different cooking techniques, such as searing and charring, a dual fuel range cooker is the best choice.
When purchasing a new range cooktop, you need to be aware of a number of aspects that include size, performance and cost. You will also need a gas connection in your home to connect the appliance. If you're unsure, it's best to have a Gas Safe engineer inspect your home prior to installing.
Currys dual fuel range cookers come in a range of models to suit all budgets. From affordable models from Indesit and Zanussi to our own Essentials collection. If you're looking for something a bit more sophisticated We also have a wide selection of premium JennAir ranges, which come with many innovative features.
It is crucial to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. It will provide you with specific information regarding the gas and electrical requirements. It is essential to make sure that your home has a gas hook-up suitable and you may have to hire a plumber to install this for you if necessary. You may also need a cooker-ring circuit that is installed by an experienced electrical engineer.